Matching return kit, compatible with the PREMIER bay window curtain poles. Available in antique brass, chrome, polished graphite and satin silver finishes. A worthy addition to the bay window pole, it can be used to extend the bay window curtain pole out of the bay and onto the walls either side.

The return kit has two lengths of pole included, one to extend each side of the Premier bay pole out of the bay and onto the walls either side. The idea is to cut the pole length at the appropriate point so that the corner joint can be inserted where the poles have been cut, so the bend will be in the correct position. Part of the 90cm length of pole will connect to the existing bay pole using one of the pole connectors/joining splices included in the Return Kit, the other part of the pole will be round the corner fixing onto the wall within the room. The corner joint will link the two pole parts together by slotting into either end of the poles.

There are two passing brackets included with the Return Kit which are to be fixed outside of the bay window, on the walls so they are within the room, not in the bay itself. The diagram shows the overall look of the Premier bay pole and Return Kit, and the positioning of the brackets.

The corner joints included in the Return Kit are double jointed, designed to 'round off' the acute angle from the bay window into the room. This type of corner joint is made up of 2 hinge joints with a 10cm length of pole in between. All three components are fixed together so it is not possible to dismantle them. Although the hinge joints are flexible and can be positioned to fit various angles. Once installed the hinge joints can be tightened so they are rigid.

There is an adequate number of passing rings for the lengths of pole included in the Return Kit.